XCMG motor grader GR165 is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. XCMG motor grader GR165 adopts Dongfeng Cummins 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.

XCMG official 170HP road motor graders GR165.

XCMG motor grader GR165 is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. 

XCMG motor grader GR165 is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

Advantages and Highlights:

1. XCMG motor grader GR165 adopts Dongfeng Cummins 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.

2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

3. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential.

4. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

5. The sealed cab is used to configure the air conditioning system. 

Product specification

Item			GR165
Basic parameters	Engine model		6BTA5.9-C180-Ⅱ
	Rated power/speed		130kW/2200rpm
	Overall dimension (standard)		8900x2625x3470
	Total weight (standard)		15000kg
	Tire specification		17.5-25
	Ground clearance (front axle)		430mm
	Tread		2156mm
	Space of front and rear axles		6219 mm
Performance parameters	Forward velocity		5、8、11、19、23、38km/h
	Reverse speed		5、11、23km/h
	Tractive effort f=0.75		77kN
	Maximum gradeability		25%
	Tire inflation pressure		260kPa
	Working system pressure		16MPa
	Transmission pressure		1.3—1.8Mpa
Working parameters	Maximum steering angle of front wheel		±50°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°
	Maximum oscillating angle of equilibrium box		±15°
	Maximum steering angle of frame		±27°
	Minimum turning radius		7.3m
	Scrape knife	Maximum lift height	450mm
		Maximum cutting depth	500mm
		Maximum tilt angle	90°
		Cutting angle	28°—70°
		Angle of revolution	360°
		Length & chord height	3660x610mm
Oil filling amount	Coolant		50L
	Fuel tank		280L
	Engine		24L
	Transmission		38L
	Hydraulic oil		110L
	Drive axle		28L
	Balancing box		46 L

Product show

XCMG E-Commerce Inc.